Raritan PCS12 User's Guide download pdf (Page 46)

Chapter 3: Prepare Raritan Devices

 If you want to terminate the configuration process, type c and

press Enter. The configuration is cancelled and you are returned

to the opening prompt.

11. If you entered y to confirm the configuration, a message appears

when the configuration is complete. You will be returned to the

opening prompt. You are now ready to begin using your Dominion

PX.

Note: The IP address configured takes about 15 seconds to take

effect for the device connected via serial line, or even longer if

configured over DHCP.

Preparing IP-Reach Devices for CC-SG Management

The following section provides you with the necessary background

information and steps to install and configure Raritan IP-Reach units to

conform to CC-SG's requirements.

Note: Be sure to document the device name, IP address, administrative

username and password, and attached systems (port number, type,

system name) in Installation Template (on page 53).

Please refer to Raritan'

s IP-Reach Quick Setup Guide for additional

information.

IP Reach TR or M Series

Attach Power Cord and Local Console

1. Connect the included AC power cord to the IP-Reach unit.

2. Attach a PS/2 keyboard and multi-sync monitor to the corresponding

ports in the back of the IP-Reach marked Admin Console.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 69 70

No comments

Raritan PCS12 User's Guide Page 46