Raritan PCS12 User's Guide download pdf (Page 45)

Chapter 3: Prepare Raritan Devices

8. By default, the LAN interface speed is set to Auto, which allows the

system to select the optimum speed. To keep the default, press

Enter. To set the speed to 10 or 100 Mbps, type the speed you want

and press Enter. You are prompted to select the duplex mode for the

LAN interface.

9. By default, the LAN interface duplex mode is set to Auto, which

allows the system to pick the optimum mode. Half duplex allows data

to be transmitted to and from the Dominion PX, but not at the same

time. Full duplex allows data to be transmitted in both directions at

the same time.

To keep the default, press Enter. To specify half or full duplex, type

half or full and press Enter. You are prompted to confirm the

information you just entered.

10. All the configuration parameters have now been entered. All the

prompts are still displayed, so you can check the information you

entered. Do one of the following:

 If the information is correct, type y and press Enter. The system

completes the configuration and displays a message when the

configuration is done.

 If one or more parameters are not correct, type n and press

Enter. You are returned to the IP configuration prompt as shown

in the screenshot of Step 4, and given the opportunity to correct

each piece of information. When the information is correct, type

y and press Enter to complete the configuration and return to the

opening prompt.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 69 70

No comments

Raritan PCS12 User's Guide Page 45