Raritan PCS12 User's Guide download pdf (Page 42)

Chapter 3: Prepare Raritan Devices

Item # Description

1 LAN Port

2 Serial Port

3 Network Port

2. Plug the other end of the null-modem cable with the DB9 connector

into the serial port (COM) of the computer.

Connecting the Dominion PX to Your Network

To use the Web interface to administer the Dominion PX, you must

connect the Dominion PX to your local area network (LAN).

1. Take a standard Category 5e UTP cable and connect one end to the

LAN port on the front of the Dominion PX. See Connecting the

Dominion PX to a Computer (on page 41) for the location of this

port on you

r size Domini

on PX.

2. Connect the other end of the cable to your LAN.

Configuring the Dominion PX for Network Connectivity

Once the Dominion PX is connected to your network, you must provide it

with an IP address and some additional networking information.

1. Go to the computer that you connected to the Dominion PX and

open a communications program such as HyperTerminal or PuTTY.

Make sure its port settings are configured as follows:

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 69 70

No comments

Raritan PCS12 User's Guide Page 42