Raritan LARA ECO User Manual download pdf (Page 33)

CHAPTER 4. CONFIGURATION 23

For a PS/2 mouse choose Auto Mouse Speed. For XP disable the option “enhance

pointer precision” in the Control Panel.

Note: The remote mouse is always synchronized with the local mouse if selecting the

option “Windows >= 2000, MAC OSX”.

SUN Solaris

Adjust the mouse settings either via “xset m 1” or use the CDE Control Panel to set the

mouse to “1:1, no acceleration”. As an alternative you may also use the Single Mouse

Mode.

MAC OS X

We recommend using the Single Mouse Mode.

OS/2

We recommend using the Single Mouse Mode.

Linux

First, choose the option “Other Operating Systems” from the the Mouse Type selection

box. Second, choose the option Auto Mouse Speed. This applies for both USB and

PS/2 mice.

Video Modes

The LARA eco recognizes a limited number of common video modes. When running X11

on the host system please do not use any custom modelines with special video modes. If

you do, the LARA eco may not be able to detect them. We recommend using any of the

standard VESA video modes instead. Please refer to Appendix C for a list of all supported

video modes.

Resetting the LARA eco to its Factory Settings

Using the Serial Interface

Reset the LARA eco and immediately press the “ESC” key. On your screen a command

prompt “=>” will be visible. Enter the command “defaults”, press the “Enter” key and wait

for a few seconds for the LARA eco to reboot. Now, you may use the default settings as

described in the Section called Initial Configuration via Serial Console. If the “=>” prompt

does not appear, change the “Flow control” setting in the serial parameters from “none” to

“hardware” and try the complete procedure again. Press the “ESC” key in the serial

terminal application within the first 3 seconds after releasing the reset button.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 102 103

No comments

Raritan LARA ECO User Manual Page 33