Raritan ASMI G4 User Manual download pdf (Page 74)

Chapter 6. Menu Options

SSH port

Port number at which the ASMI module’s SSH (Secure Shell) server is listening. If left empty the

default value (port 22) will be used.

Bandwidth Limit

The maximum network trafﬁc generated through the ASMI module Ethernet device. Value in Kbit/s.

Enable Telnet

This enables the Telnet client mode.

Enable SSH

This enables the SSH (Secure Shell) client mode.

Disable Setup Protocol

Enable this option to exclude the ASMI module from the setup protocol.

LAN Interface Settings

This entry ﬁeld displays the current settings for the Ethernet/LAN interface of the ASMI module. You

may choose between auto negotiation and a ﬁxed setting for the Ethernet transceiver settings "interface

speed" and "duplex mode" in case auto negotiation does not work correctly.

LAN interface speed

Depending on your network connection you may select an appropriate speed value for this interface.

To adjust the interface automatically choose "autodetect" (default value). If this selection results in

misbehavior of the interface, choose one of other speed options to work with. The interface will

transmit and receive data with that ﬁxed speed.

LAN interface duplex mode

If necessary you may also select a speciﬁc duplex mode. The default value is set to "autodetect"

which leads to an automatic setting of the duplex mode depending on your network (recommended).

As an alternative you may explicitly set the interface to either "half duplex" or "full duplex" mode.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 114 115

No comments

Raritan ASMI G4 User Manual Page 74