Raritan DOMINION SX - Specifications download pdf (Page 131)

APPENDIX E: CONFIGURING CISCO ACS RADIUS SERVER 121

Appendix E: Configuring Cisco ACS RADIUS

Server

Use the following procedure to configure the Cisco RADIUS server so that you can work with Dominion

SX. It is assumed here that Administrators are familiar with setting up and configuring the RADIUS server.

In order for Dominion SX to support RADIUS, both the unit and the user information must be added into

the RADIUS configuration.

Only Version 3.0 has been validated; however, other versions of the RADIUS server should operate with

the unit. Only the user’s role can be controlled on the unit using the RADIUS (IETF) option.

Note: Access restrictions to specific ports on the unit cannot be controlled.

1. Log on to Cisco ACS Server using the browser.

Figure 91 Cisco ACS Main Display

2. Click on the [Network Configuration] button in the left panel of the screen and select Add Entry to

add/edit AAA Client. This must be done for each unit that is going to accessed via RADIUS. Click on

the Authenticate Using drop-down menu and select RADIUS (IETF) from this list. Click on the

[Submit] button.

Figure 92 Unit Configuration Display

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 177 178

No comments

Raritan DOMINION SX - Specifications Page 131