Raritan MX416 User's Guide download pdf (Page 58)

Chapter 3: Working with Target Servers

Calibrate Color

Use the Calibrate Color command to optimize the color levels (hue,

brightness, saturation) of the transmitted video images. The KX II-101

color settings are on a target server-basis.

Note: The Calibrate Color command applies to the current connection

only.

To calibrate the color, do the following:

• Choose Video > Calibrate Color or click the Calibrate Color button

in the toolbar. The target device screen updates its color

calibration.

VKC Video Settings

Use the Video Settings command to manually adjust the video settings.

To change the video settings:

1. Choose Video > Video Settings or click the Video Settings button

in the toolbar to open the Video Settings dialog.

2. Adjust the following settings as required. As you adjust the settings

the effects are immediately visible:

a. Noise Filter

The KX II-101 device can filter out the electrical interference of

video output from graphics cards. This feature optimizes picture

quality and reduces bandwidth. Higher settings transmit variant

pixels only if a large color variation exists in comparison to the

neighboring pixels. However, setting the threshold too high can

result in the unintentional filtering of desired screen changes.

Lower settings transmit most pixel changes. Setting this

threshold too low can result in higher bandwidth use.

b. Brightness: Use this setting to adjust the brightness of the target

server display.

c. Brightness Red - Controls the brightness of the target server

display for the red signal.

d. Brightness Green - Controls the brightness of the green signal.

e. Brightness Blue - Controls the brightness of the blue signal.

f. Contrast Red - Controls the red signal contrast.

g. Contrast Green - Controls the green signal.

h. Contrast Blue - Controls the blue signal.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 262 263

No comments

Raritan MX416 User's Guide Page 58