Raritan MX416 User's Guide download pdf (Page 225)

Chapter 11: Command Line Interface (CLI)

217

Network

The Configuration > Network commands are used to configure the KX II-

101 network connection and device name.

Command Description

interface Configure the KX II-101 device

network interface.

name Set the device name.

Name Command

The name command is used to configure the device and host name.

Syntax

name [unitname name] [domain name] [force

<true|false>]

name Command Example

The following command sets the device name:

Admin Port > Config > Network > name unitname

<device name> domain <host name> force trues

Interface Command

The interface command is used to configure the KX II-101 network

interface. When the command is accepted, the device will drop the

HTTP/HTTPS connection and initialize a new network connection. All

HTTP/HTTPS users must reconnect to the device using the new IP

address and the correct username and password. See Installation and

Configuration (on page 9).

The syntax of

the interface comm

and is:

interface [ipauto <none|dhcp>] [ip <ipaddress>]

[mask <subnetmask>] [gw <ipaddress>] [mode

<auto/10hdx/10fdx/100hdx/100fdx]

The network command options are described in the following table.

Command Option Description

ipauto Static or dynamic IP address

ip ipaddress IP address of the KX II-101 assigned for

access from the IP network

mask subnetmask Subnet mask obtained from the IP

administrator

1 2 ... 220 221 222 223 224 225 226 227 228 229 230 ... 262 263

No comments

Raritan MX416 User's Guide Page 225